We deliver advanced 3D scanning systems, high-precision laser trackers, and intelligent inspection & Design software solutions to enable accurate measurement, quality validation, and digital engineering workflows for manufacturing industries
Portable 3D Metrology products for High Precision measurements at Shopfloor.
The Full Measurement Workflow, One Partner.
Qubotix brings products that fit the full workflow. Scanners capture the real part. Trackers handle large builds and alignment points. Geomagic software turns captured data into CAD models or inspection reports that teams can share and use.
3D Scanners
Handheld 3D Scanner
Capture complex geometry near production without long setup time
Handheld scanning helps teams capture geometry near production without long setup time. It works well for complex surfaces, tight access areas, and repeat checks on part families.
Product Highlights
- Accuracies starting from 0.020 mm
- Minimum Part size to scan: 0.050 Meters
- Maximum Part size to scan: 20 Meters
- Blue Laser Scanners for Higher Engineering accuracy & Speed
- White Structured Light scanners for Human & Non engineering part Scanning
- Multiple Alignment methods of scanning: Positioning Targets, Infrared Tracker, Features & Textures
Interested in this product?
Get a quote or download the product brochure. Our team responds within 4 business hours.
Automated 3D Scanner
Consistent batch inspection with repeatable automated cycles
Automated scanning fits batch inspection and repeat programs where manual scanning takes too much time. A cell repeats the same routine and gives consistent results across shifts.
Product Highlights
- Metrology Inspections comes with n number of parameters to measure and compare with CAD. We make the inspection process simple and Automated
- Seamless integration of 3D Scanners with Cobots/Robots and Inspection softwares
- Complete Programming of Robot Path and Inspection Template through customisable inspection software
- Zero inspection error guaranteed systems
- Suitable for component size from 0.1 Meters to 5 Meters
Interested in this product?
Get a quote or download the product brochure. Our team responds within 4 business hours.
Laser Trackers
FARO Vantage Laser Trackers
Large-volume measurement and alignment up to 80 metres
Laser trackers help teams measure large assemblies and verify alignment points during setup. They fit machine install checks, fixture alignment, and large build validation where short tools fall short.
Product Highlights
- Cover large-volume measurement needs with FARO Vantage Laser Trackers.
- Use VantageS when the job needs longer range measurement up to 80 m.
- Use VantageE when the job needs short-to-medium range work up to 35 m.
- Speed up target finding and tracking with ActiveSeek during measurement.
- Confirm fixture and jig position during setup and reduce late-stage correction work.
- Verify reference points in stages and keep builds stable from start to finish.
Interested in this product?
Get a quote or download the product brochure. Our team responds within 4 business hours.
Geomagic Software
Geomagic Design X
Turn scan data into editable, feature-based CAD models
Design X turns scan data into an editable CAD model. Teams use it when CAD goes missing or when a drawing stops matching the real part.
Product Highlights
- Combine scan processing with history-based CAD modeling in one workflow.
- Build parametric, editable solid models that fit existing CAD work.
- Recreate feature-based CAD from scan meshes and point clouds.
- Fit accurate surfaces for blended and freeform geometry when parts need clean surfacing.
- Transfer models into CAD through Live Transfer and keep the feature structure.
- Validate the CAD against scan data before release to machining or tooling.
Interested in this product?
Get a quote or download the product brochure. Our team responds within 4 business hours.
Geomagic Control X
Scan-based inspection and reporting your teams can share and act on
Control X turns scan data into inspection results that teams can share. Teams compare scans to CAD or to other scans and close inspection decisions faster.
Product Highlights
- Run scan-based inspection and metrology in one place.
- Compare scan data to CAD or to another scan and view deviation clearly.
- Connect 3D scanners and portable CMM devices inside Control X.
- Build repeat inspection routines with Visual Scripting and Automation Server.
- Check GD&T and dimensions, then export reports for production and quality review.
- Use sections and boundary tools to verify critical features and edges.
Interested in this product?
Get a quote or download the product brochure. Our team responds within 4 business hours.
Common Questions
01.How does a team choose between a handheld scanner and an automated scanner?
Handheld scanning fits mixed jobs and on-site checks. Automated scanning fits repeat batches and steady inspection programs that need consistent cycles.
02.What jobs fit a laser tracker best?
Laser trackers fit large assemblies, alignment points, fixture setup, and machine install checks. Teams use them when long-range measurement matters.
03.When does Geomagic Design X fit better than inspection software?
Design X fits CAD rebuild work. It turns scan data into an editable CAD model that engineering can machine and revise.
04.When does Geomagic Control X fit better than CAD rebuild software?
Control X fits inspection and reporting. It compares scan data to CAD or other scans and produces inspection outputs for teams.
05.What inputs help Qubotix recommend the right product?
A few details help: part size, surface type, tolerance need, and the work area where the team checks the part. A quick photo and a drawing also help.
Not sure which product fits your requirement?
Share your part size, tolerance need, and work area. Our team will recommend the right scanner, tracker, or software — at no cost.